Mechanical Engineering

Department of Mechanical Engineering

ABOUT DEPARTMENT

ABOUT US

Welcome to the Department of Mechanical Engineering at Dr. A.P.J. Abdul Kalam Institute of Technology Tanakpur, where experienced faculties and highly motivated students supported by a dedicated staff experience a unique engineering education. The Department offers 4-years academic programme of Bachelor of Technology (B.Tech.) degree.

The extremely dynamic and energetic faculties, and a well experienced support staff, give the department a breadth of research focus and wide range of technical expertise. Our experienced faculty members have a passion for teaching and an avowed commitment to research and development. Apart from teaching, the faculties are also engaged in diverse research areas. They publish their work in reputed journals and present their work at prestigious national and international conferences. We are continually striving to improve the quality of our programs by finding new ways of structuring our curriculum and exploring new delivery methods.

We provide our students opportunities to engage in experiments, design work, project work, industrial training, seminars, and team work to enhance the learning process that is so vital for a holistic engineering education. They develop skills of inquiring and exploring new ideas on their own. In essence, they are well prepared for the life-long learning that is vital for an enriching career in engineering. Our students develop an ability to think, are able to innovate, and acquire a strong foundation in technical knowledge.

Historical Background

➢ B.Tech. in Mechanical Engineering was started in 2016. ➢ B.Tech. in Robotics & Automation was started in 2022.

Vision:

The vision of the department is to be a leader in imparting professional education in Mechanical Engineering and nurture the students to become successful entrepreneurs and responsible citizens capable of developing innovative, interdisciplinary and sustainable technologies.

Mission:

Provide education of high quality and train students for a globally competitive environment.
Provide support for faculty to conduct high quality research and ensure high quality education.
Enhance the community through civic responsibility, technical knowledge and the promotion of economic development.

Program Educational Objectives (PEOs)

PEO1: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization for the solution of complex engineering problems.

PEO2: Create, select, and apply appropriate techniques, resources, and modern engineering and including prediction and modelling to complex engineering activities, with an understanding of the limitations.

PEO3: Contribute towards Nation’s development through their ability to solve diverse and complex industrial problems across a broad range of design and production.

PEO4: Pursue careers in government services, research organizations, industries, higher education, entrepreneurship, and professional development.

PEO5: Adapt to changing scenarios of dynamic technology with the potential to solve larger societal problems using a coherent and flexible approach to decision-making.

Program Specific Outcomes (PSOs)

PSO1:	Capability to identify, analyze and build manufacturing and thermal systems using mechanical
engineering principles and techniques.

PSO2: Developing attitude to accept global challenges and apply mechanical engineering knowledge for solving problems related to design, production, and interdisciplinary fields.

PSO3: Ability to critical analysis and problem-solving skills required in the field of Thermal, Production and design engineering for carrying out research activities.

PSO4: Ability to conduct experiment and simulate the real-life situations involved in engineering using computational techniques and instrumentation; and can work independently in research or industrial environment

PSO5: Capability to compete the available employment opportunities and solve complex engineering problems related to production, Design, Thermal and allied industries using systematic tools.

Few accomplishments

Research facilities including workshop, advanced lab, advanced research software, independent work space for students.
All the Faculty published paper in reputed journal: Indexing like SCI, Scopus, UGC etc.
The Ongoing student projects showcasing expertise in the area of Robotics & Automation, Design, Thermal, Production & Industrial.
All students admitted through the entrance exam and Top rankers and school toppers opted the branch in last counseling.

FACULTY

S.NO.	FACULTY NAME	QUALIFICATION	DESIGNATION
1.	Mr. Devesh Sharma	M. Tech. (Manufacturing Engg & Management), Ph.D (Production Engg.)	ASSISTANT PROFESSOR (HOD) MOB-9818480969
2.	Mr. Ravinder Singh	M. Tech. (Thermal Engg.)	ASSISTANT PROFESSOR MOB-8791643144
3.	Dr. Dev Prakash Satsangi	M. Tech (Thermal Engineering), PhD	ASSISTANT PROFESSOR MOB-9198433411
4.	Dr. Bhupendra Kumar	M. Tech. (Production Engg.)	ASSISTANT PROFESSOR MOB-7351680788
5.	Dr. Rahul	M. Tech. (Energy Engg.)	Guest Faculty MOB-7055883985
6.	Mr. Nitish Phulera	M. Tech (Thermal Engineering)	Guest Faculty MOB-7351314729
7.

ACADEMICS

The department offers two academics programs: ➢ B.Tech Mechanical Engineering (ME) ➢ B.Tech Robotics & Automation.(R&A)

S.No.	Course Name	AICTE Approved Seats	Duration	Qualification Requirement
1.	B.Tech (ME)	60	4 years	Sr. Secondary (10+2) in PCM/PCMB with minimum 45% marks from recognized Board / University
2.	B.Tech (R&A)	60	4 years	Sr. Secondary (10+2) in PCM/PCMB with minimum 45% marks from recognized Board / University
3.	B.Tech. (ME/ R&A) Lateral entry		3 years	3 years diploma / B.Sc. from recognized university

LABORATORIES

Workshop

Workshop is the laboratory which provides both the area and tools that may be required for the manufacture goods. The available machines in the workshop are carpentry tools and equipment’s, Welding (arc and gas welding) and lathe machine etc. These machineries are used for gaining practical knowledge in the various subjects of different disciplines.

Engineering

Graphics Lab

The Engineering Graphics Lab aim is to prepare students with appropriate knowledge of drawings and designs of objects, geometrical patterns and 3D structures. The Engineering Graphics Lab guides and helps the students to learn how technical drawings can be drawn using different methods. The students learn theory of projections and projection of various objects.

Fluid Mechanics and Machinery	The Fluid Mechanics and Machinery Laboratory is designed to examine the properties of fluids and their respective machinery to examine the properties of fluids and to conduct experiments. Fluid Machinery is a well-equipped lab which provides ideas on various hydraulic machines. The laboratory includes venturi meter and orifice meter apparatus to examine the behaviour of the fluid flow and various machines like, Pelton turbine test rig, Kaplan turbine test rig, Francis turbine test rig, Compressor test rig, etc.
Theory of Machine Lab	The Theory of Machine Lab deals with the study of relative motion between various parts of a machine, and forces which act on them. The laboratory includes Flywheel and Balancing apparatus.
Meteorology lab	The Meteorology Lab deals with the common understanding of units and measurements.
Manufacturing Science and Technology	The Manufacturing Science and Technology lab objectives are to understand the different metal casting processes, different metal forming and sheet metal operations along with the force calculations. The available machines in the workshop are Universal Testing Machine, Torsion Testing Machine, Impact Testing Machine, Hardness Testing Machine, jigs and fixtures, Float Table and many more. These machineries are used for gaining practical knowledge in the various subjects of different disciplines.
Heat and Mass Transfer Lab	The Heat and Mass Transfer Lab deals with the experimental study of phenomena of heat transfer through various modes (conduction, convection and radiation). The apparatus includes Forced Convection Apparatus, Natural Convection Apparatus, Heat Ex changer Apparatus, Pool Boiling Apparatus, Heat Pipe Apparatus.
Refrigeration and Air Conditioning Lab	The Refrigeration and Air Conditioning Lab deals with the experimental study of various refrigeration system. The lab includes Refrigerator Test Rig, Heat Pump Test Rig, Air Conditioning Test Rig, etc.
Internal Combustion Engine Lab	The I.C. Engine laboratory deals with the study of various components of S.I. Engine and C.I. Engine.
Computer Integrated Manufacturing lab	The Computer Integrated Manufacturing laboratory deals with the experimental study of different processes in CNC machining.
CAD/CAM Lab	The CAD/CAM Lab deals with the various aspects of design of an object. This lab includes various design software like AUTOCAD, SOLIDWORKS, MATLAB, ANSYS, CREO, CATIA etc.

PUBLICATIONS

S.No.	Author Name	Title	Year	Complete Citation
1.	Dr. Bhupendra Kumar	Tensile and Fracture Toughness behavior of Centrifugally Cast Al/Al₂O₃ Functionally Graded Material	2023	Indian Journal of Engineering and Materials Sciences (IJEMS) Vol.30, April 2023. DOI: 10.56042/ijems.v30i2.1393
2.	Dr. Bhupendra Kumar	The impact of centrifugal casting processing parameters on the wear behaviour of Al alloy/Al₂O₃ functionally graded Materials.	2022	Materials Today: Proceedings, https://doi.org/10.1016/j.mat pr.2022.01.408.
3.	Mr. Devesh Sharma	Energy saving analysis of Geothermal Heat Exchanger for horizontal and vertical configuration for tropical country	2022	Energy Saving Analysis of Geothermal Heat Exchanger for Horizontal and Vertical Configuration for Tropical Country \| SpringerLink
4.	Mr.Nitish Phulera	Effects of Plasma nitriding on mechanical,tribological and corrosion properties of friction stir welded joints of Al 2024	2021	Materials Today: Proceedings, https://doi.org/10.1016/j.matpr .2021.04.218

5.	Dr. Rahul Kshetri	Effects of plasma nitriding on mechanical, tribological and corrosion properties of friction stir welded joints of Al 2024	2021	Materials Today: Else Elsevier 10.1016/j.matpr.2021.04.218
6.	Dr. Rahul Kshetri	Effects of plasma nitriding on mechanical, tribological and corrosion properties of friction stir welded joints of Al 2024	2021	Materials Today: Else Elsevier 10.1016/j.matpr.2021.04.218
7.	Dr. Rahul Kshetri	Experimental investigation of optimum charging and discharging time on packed bed heat regenerator for space heating and solar drying application	2021	Materials Today: Else Elsevier 10.1016/j.matpr.2021.04.210
8.	Dr. Rahul Kshetri	Effect of introducing varying number of fins over LED light bulb on thermal behavior	2020	Materials Today: Elsevier doi.org/10.1016/j.matpr.2020. 10.876
9.	Dr. Rahul Kshetri	An Investigation of Cutting Parameters and Its Effects on Surface Roughness in High Speed Turning of 52100 Bearing Steel	2020	Springer Nature Singapore Pte Ltd. 2020 Pages 105-115
10.	Mr. Devesh Sharma	Dimensional Feasibility of Retrofitting of Aqua-Ammonia Absorption Refrigeration System Utilizing Exhaust and Coolant Heat of an Automobile Engine for air conditioning of vehicle cabin	2020	International Journal of Scientific Engineering and Technology Volume 9, 2020.
11.	Dr. Bhupendra Kumar	Processing and Characterization of Natural Fiber Reinforced Polymer Composite	2019	IJEAT ISSN: 2249 – 8958, Volume-9 Issue-2, December, 2019. DOI:10.35940/ijeat. B2663.129219
12.	Dr. Bhupendra Kumar	Dry Sliding Wear Behaviour of Aluminium Metal MatrixBased Functionally Graded Materials Reinforced with Alumina Particles	2019	Trends in Materials Engineering, Springer Nature. 2019. https://doi.org/10.1007/978981-13-9016-6_1
13.	Dr. Bhupendra Kumar	Influence of combined multiple twisted tape and perforated circular disk on heat transfer in circular tube,	2019	International Journal of Applied Engineering Research ISSN 0973-4562 Volume 14, Number 9, 2019.
14.	Mr. Himanshu Sah	Thermal performance and frictional losses study of solid hollow circular disc with	2019	https://doi.org/10.1007/s0023 1 –019 –02631 –z
		rectangular wings in circular tube
15.	Mr. Himanshu Sah	Augmentation of thermal performance of heat exchanger using elliptical and circular insert with vertical twisted tape	2019	http://dx.doi.org/10.1080/089 16152.2019.1662856
16.	Mr. Devesh Sharma	Cubic Equation of State Model for HC 290	2019	Cubic Equation of State Model for HC –290 \| IEEE Conference Publication \| IEEE Xplore
17.	Mr. Devesh Sharma	Study of Dieterici and two constant EoS Models for R-134a, R-152a, R-123 and R-290	2019	Study of Dieterici and Two Constant EoS Models for R – 134a, R –152a, R –123 and R290 \| IEEE Conference Publication \| IEEE Xplore

RESEARCH PROJECT

S. No.	Project Title	Project Members	Supervisor
1.	Modification in Design of student furniture (seat &desk).	1. Dhananjay Sharma 2. Km. Usha 3. Tushar Goswami 4. Gourav Sharma	1. Mr. Devesh Sharma 2. Mr. Himanshu Sah
2.	A Comparative Analysis of Normal Fans and Dyon Bladeless Fans with Same Brushless DC Motor.	1. Nishant Chaudhary 2. Vishwakarma Ashish 3. Akash Joshi 4. Deepak Pant	1. Mr. Himanshu Sah
3.	Cost Analysis and Feasibility of Piero electric and Solar System for Dynamic Highway EV Charging.	1. Kartik Verma 2. Vishwakarma Ashish 3. Yash Bhatt 4. Abhishav Pratap Singh 5. Kuldeep Bhatt	1. Mr. Nitish Phulera

STUDENTS ACHIEVEMENTS

S. No.	Name of student	Batch	Achievement
1.	Himanshu Garkoti	2016-20	HVAC Designing
2.	Shrey Prakash Saxena	2017-21	Baja Motors / IIT-BHU
3.	Jagdish Pandey	2017-21	Indian Armed Force
4.	Neeraj Khatri	2017-21	Mahindra Group
5.	Piyush Rai	2017-21	Peacock India Pvt. Ltd.
6.	Pranjal Gupta	2017-21	ISIE India Ltd./MBA
7.	Akshit Bhardwaj	2017-21	Technico Industry Ltd. Manesar
8.	Abhishek Srivastav	2018-22	GV Aviation / Hyundai Ltd. / NIT Hamirpur
9.	Saurabh Singh	2018-22	Bisleri Pvt. Ltd. / Honda Pvt. Ltd.
10.	Gaurav Joshi	2018-22	Honda Pvt. Ltd.
11.	Rajat Joshi	2018-22	Agrawal Metals
12.	Nitin Panwar	2018-22	Oppo Pvt. Ltd.
13.	Manoj Kumar Bain	2018-22	Auto Desk Design
14.	Sindhu Mandal	2018-22	Self-employment
15.	Alshifa Shahbaz	2019-23	Sundaram Fasteners Ltd.

STUDENTS

S.No.	Name	Roll No.	Year	Advisor
1.	CHANDAN JHA	221620104001	2nd	Mr. Devesh Sharma
2.	DIVYANSHU JOSHI	221620104002	2nd	Mr. Devesh Sharma
3.	GAURAV MEHRA	221620104003	2nd	Mr. Devesh Sharma
4.	HARSH SAXENA	221620104004	2nd	Mr. Devesh Sharma
5.	HIMANSHU KASHYAP	221620104005	2nd	Mr. Devesh Sharma
6.	TANMAY PANDEY	221620104006	2nd	Mr. Devesh Sharma
7.	VASUDA TIWARI	221620104007	2nd	Dr. Rahul Kshetri
8.	YOGESH NAINWAL	221620104008	2nd	Dr. Rahul Kshetri
9.	DEEPAK NATH GOSWAMI	731620104001	2nd	Dr. Rahul Kshetri
10.	HARSHIT SINGHANI	731620104002	2nd	Dr. Rahul Kshetri
11.	NITIN TIWARI	731620104003	2nd	Dr. Rahul Kshetri
12.	PAWAN BHARTI	731620104004	2nd	Dr. Bhupendra Kumar
13.	ROHIT SINGH	731620104005	2nd	Dr. Bhupendra Kumar
14.	SHUBHAM BISHT	731620104006	2nd	Dr. Bhupendra Kumar
15.	VISHAL	731620104007	2nd	Dr. Bhupendra Kumar
16.	YASH	731620104008	2nd	Dr. Bhupendra Kumar
17.	ABHINAV YADAV	211620104001	3rd	Mr. Ravinder Singh
18.	AMOSH BHATT	211620104002	3rd	Mr. Ravinder Singh
19.	GAURAV GARKOTI	211620104003	3rd	Mr. Ravinder Singh
20.	HEMA RAJPOOT	211620104004	3rd	Mr. Ravinder Singh
21.	JATIN AGARWAL	211620104005	3rd	Mr. Nitish Phulera
22.	PREM ADHIKARI	211620104006	3rd	Mr. Nitish Phulera
23.	ABHISHEK KUMAR SINGH	721620104001	3rd	Mr. Nitish Phulera
24.	DHEERAJ SINGH RANA	721620104002	3rd	Mr. Nitish Phulera
25.	ABHISHAV PRATAP SINGH	201620104001	4th	Dr. Dev Prakash Satsangi
26.	DHANANJAY SHARMA	201620104003	4th	Dr. Dev Prakash Satsangi
27.	KARTIK VERMA	201620104004	4th	Dr. Dev Prakash Satsangi
28.	USHA	201620104005	4th	Dr. Dev Prakash Satsangi
29.	KULDEEP BHATT	201620104006	4th	Dr. Dev Prakash Satsangi
30.	TUSHAR GOSWAMI	201620104007	4th	Dr. Dev Prakash Satsangi
31.	VIKRAM NAGARKOTI	201620104008	4th	Mr. Himanshu Sah
32.	VISHWAKARMA ASHISH	201620104009	4th	Mr. Himanshu Sah
33.	YASH BHATT	201620104010	4th	Mr. Himanshu Sah
34.	AKASH JOSHI	711620104001	4th	Mr. Himanshu Sah
35.	DEEPAK PANT	711620104002	4th	Mr. Himanshu Sah
36.	GOURAV SHARMA	711620104003	4th	Mr. Himanshu Sah
37.	NISHANT CHAUDHARY	711620104004	4th	Mr. Himanshu Sah

TRAINING

S.No.	Faculty Name	Designation	Department	FDP/Conference	Attended/Organized	Title	From Date to till Date	Venue

COURSES

S. No.	Course Title	Course code	L	T	P	Credit	Course Instructor/Incharge
1.	Renewable Energy Technology	BOME- 605(C)	3	0	0	3	Dr. Bhupendra Kumar
	Applied Thermodynamics	MET-006 MEP-008	3	1	2	5
	Major Project	BMEP-806	0	0	2	1
2.	Strength of Materials	MET-007	3	1	0	4	Dr. Dev Prakash Satsangi
	Automobile Engineering	BMET-802 BMEP-802	3	1	2	5
	Work Shop Practices	MEP-003	0	1	2	2
3.	Refrigeration & Air conditioning	BMET-603 BMEP-603	3	1	2	5	Mr. Ravinder Singh
	Machine Component & Design-II	BMET-602/ BMEP-602	3	0	4	5
	Environment & Ecology	BMET- 803(B)	3	0	0	3
4.	Turbomachinery	BMET-601 BMEP-601	3	1	2	5	Mr. Devesh Sharma
	Power Plant Engineering	BMET- 802(A)	3	0	0	3
	Work Shop Practices	MEP-003	0	1	2	2
	Major Project	BMEP-806	0	0	2	1
	Open-Source Lab	MEP-608	0	0	2	1
5,	Operation Research	BMET-801	3	1	0	4
	Mechanics of Machines	MET- 005/ MEP-010	3	1	2	5
		MEP-010	0	0	2	1
	Major Project	BMEP-806	0	0	2	1	Dr. Rahul Kshetri
6.	Basic Mechanical Engineering	MET-001 MEP-001	3	1	2	5	Mr. Himanshu Sah
	Open-Source Lab	BMEP-805	0	0	2	1
	Major Project	BMEP-806	0	0	2	1
7.	Product Design	BMET- 604(C)	3	0	0	3	Mr. Nitish Phulera
	Manufacturing Science & Technology-1	MET-008 MEP-009	3	1	2	5
	Minor Project 1	BMEP-607	0	0	4	2
8.	Python Programming	CST-005	2	0	0		Mr. Naresh Kumar
9.	Machine Learning	SRE-601	3	0	0	3	Ms. Neha Bisht
10.	Technical Communication	AHT-007	2	1	0	3	Guest Faculty
11.	Microprocessors & Microcontrollers	RAT-004 RAP-003	3	1	2	5	Mrs. Priyanka Pandey
12.	Automatic Control system	RAT-003	3	1	0	4	Mrs. Anjana

ACTIVITIES

Organized 6 days workshop on “Cyber Security” from 18^th -23^rd March 2023

Organized one day workshop “Upcoming Trends in Drone Industry” conducted by “Cross Vind Solutions” on September 11, 2023.

Industrial Visit at SIDCUL Sitarganj & Rudrapur.

Organized two days’ workshop on “Mixed Reality on IoT” conducted by Techno Hub Laboratories Pvt.

Ltd. Under the aegis of Uttarakhand Science Education and Research Centre (USERC) on 29 September 2023.

Organized Seven Days Workshop on “Exploring New Opportunities in Drone Technology and Internet of Things” conducted by Science Technology Engineering and Mathematics (STEM) from 16^th– 22^thOctober 2023.

Organized Three Days “Smart India Hackathon 2023” from 25^th-27^th October 2023.

Creation of Innovative machines/Equipment under the aegis of Unnat Bharat Abhiyan and presented the same at National level competition held in IIT Roorkee.

TIME TABLE

Dr. A.P.J. Abdul Kalam Institute of Technology, Tanakpur Time-Table

Tech. (4^th Year) VIII Semester (ME)

Session:- 2023-24 Room No:- 31

w.e.f. – 25/01/2024

Abbreviations: LL-Lang Lab, VL-Virtual Lab, L-Lecture, T-Tutorial

SUBJECT CODE	SUBJECT NAME	FACULTY NAME	FACULTY CODE
BMET-801	Operation Research	Dr. Rahul Kshetri	RK
BMET-802/ BMEP-802	Automobile	Dr. Dev Prakash Satsangi	DPS
BMET-802(A)	Power Plant Engineering	Mr. Devesh Sharma	DS
BMET-803(B)	Environment & Ecology	Mr. Ravindra Singh	RS
BMEP-805	Open Source Lab	Mr. Himanshu Sah	HS
BMEP-806	Major Project	Dr. Rahul Kshetri	RK
BMEP-806	Major Project	Mr. Himanshu Sah	HS
BMEP-806	Major Project	Dr. Bupendra Kumar	BK
BMEP-806	Major Project	Mr. Devesh Sharma	DS

Dr. A.P.J. Abdul Kalam Institute of Technology, Tanakpur Time-Table

Tech. (3^rd Year) VI Semester (ME)

Session:- 2023-24 Room No:- 30 w.e.f. :- 25/01/2024

Abbreviations: LL-Lang Lab, VL-Virtual Lab, L-Lecture, T-Tutorial, BR-Board Room

SUBJECT CODE	SUBJECT NAME	FACULTY NAME	FACULTY CODE
BMET-601/BMEP-601	Turbo machinery/Lab	Mr. Devesh Sharma	DS
BMET-602/BMEP-602	Machine Component Design-II/	Mr. Ravindra Singh	RS
BMET-603/BMEP-603	Refrigeration and air-condition	Mr. Ravindra Singh	RS
BMET-604(C)	Product Design	Mr. Nitish Phulera	NP
BOME-605(C )	Renewable Energy Technology	Dr. Bhupendra Kumar	BK
BMEP-607	Minor Project-I	Dr. Bhupendra Kumar	BK
BMEP-607	Minor Project-I	Dr. Rahul Kshetri	RK
BMEP-608	Open Source Lab	Mr. Devesh Sharma	DS
SRE-601	Machine Learning	Ms. Neha Bisht	NB

Dr. A.P.J. Abdul Kalam Institute of Technology, Tanakpur

Time-Table

Tech. (2^nd Year) IV Semester (ME)

Session:- 2023-24 Room No:- 42

w.e.f. :- 25/01/2024

Period I II III IV V VI VII VIII

Time 9:00-9:55 10:00-10:55 11:00-11:55 12:00-12:55 1:00-2:00 2:00-2:55 3:00-3:55 4:00-

Day 4:55

Monday MET-005(L) MET-008(L) MET-007(L) MET-006(L)

(RK) (NP) (DPS) (BK) L

Tuesday MET-005(L) MET-008(L) MET-006(L) CST-

(RK) (NP) (BK) U 005(L)

(NK)

Wednesday MET-007(L) MET-005(L) MET-006(L) MEP-010(P)

(DPS) (RK) (BK) N (RK)

Thursday MET-007(L) MET-008(L) AHT-007(L) MEP-009(P)

(DPS) (NP) (NAB) C (NP)

Friday AHT-007(L) MET-005(T) MET-007(T) MET-008(T) MEP-008(P)

(NAB) (RK) (DPS) (NP) H (BK)

Saturday CST-005(L) MET-006(T) AHT-007(L)

(NK) (BK) (NAB)

Abbreviations: LL-Lang Lab, VL-Virtual Lab, L-Lecture, T-Tutorial

SUBJECT CODE SUBJECT NAME FACULTY NAME FACULTY CODE

AHT-007 Technical Communication Mr.Narendra Biswas NAB

MET-005 MEP-010 Mechanics of Machines/Lab Mr. Rahul Kshetri RK

MET-006/ MEP-008 Applied Thermodynamics/Lab Dr. Bhupendra Kumar BK MET-007 Strength of Materials Dr. Dev Prakash Satsangi DPS

MET-008/ MEP-009 Manufacturing Science & Technology-I/Lab Mr. Nitish Phulera NP

CST-005 Python Programming Mr. Naresh Kumar NK

Dr. A.P.J. Abdul Kalam Institute of Technology, Tanakpur Time-Table

Tech. (2nd Year) IV Semester (R&A Engg.)

Session:- 2023-24 Room No:- 31

w.e.f. :- 25/01/2024

Period I II III IV V VI VII VIII

Time 9:00-9:55 10:00-10:55 11:00-11:55 12:00-12:55 1:00-2:00 2:00-2:55 3:00-3:55 4:00-

Day 4:55

Monday RAT-003(L) MET-008(L)(NP) MET-007(L)(DPS) RAT-004(L)

(AN) R. No. 42 R. No. 42 (PP) L

Tuesday RAT-004(L) MET-008(L)(NP) RAT-0003(L) CST-005(L)

(PP) R. No. 42 (AN) (NK)

Wednesday MET- RAP-003(P) RAT-0003(L) U MEP-010(P)

007(L)(DPS) (PP) (AN) (RK)

No. 42

Thursday RAT-004(L) MET-007(L)(DPS) MET-008(L)(NP) AHT-007(L) N MEP-009(P) (PP) R. No. 42 R. No. 42 (NAB), R. No.-06 (NP)

Friday AHT-007(L) MET-007(L)(DPS) MET-008(T)(NP)

(NAB), R. R. No. 42 R. No. 42 C

No.-06

Saturday CST-005(L) RAT-003(T) AHT-007(L) RAT-004(T)

(NK) (AN) (NAB), R. No.-06 (PP) H

Abbreviations: LL-Lang Lab, VL-Virtual Lab, L-Lecture, T-Tutorial

SUBJECT CODE	SUBJECT NAME	FACULTY NAME	FACULTY CODE
AHT-007	Technical Communication	Mr.Narendra Biswas	NAB
RAT-003	Automatic control system	Mrs. Anjna	AN
RAT-004/RAP-003	Microprocessors and Microcontrollers/Lab	Mrs.Priyanka Pandey	PP
MET-007	Strength of Materials	Dr. Dev Prakash Satsangi	DPS
MET-008/ MEP-009	Manufacturing Science & Technology-I/Lab	Mr. Nitish Phulera	NP
CST-005	Python Programming	Mr. Naresh Kumar	NK
MEP-010	Mechanics of Machines Lab	Mr. Rahul Kshetri	RK

PHOTO GALLERY